Search For Events:

 
Cullman ATN Center 206 3rd Street SW
Cullman
Alabama
35055
United States
July
20
HAZWOPER 8 Hour Refresher 7/20/2018
Event Start Date: 7/20/2018 8:00 AM Event End Date: 7/20/2018 5:00 PM
Cost per place: $150.00
This courses is designed for individuals that have already taken the 40 hour or 24 hour course and wish to maintain their HAZWOPER training status/certification. The hazwoper refresher course is required each year under the provisions of 29 CFR 1910.120, OSHA's standard which regulates hazardous waste operations and emergency response. All major topics covered in the original training will be reviewed. In addition, new regulations and environmental laws pertinent to hazardous waste operations and emergency response will be introduced. All participants will receive a course certificate upon the successful completion of the refresher course. This course is available as an online offering.
Event Locations
Cullman ATN Center
This event can only be signed up for between 5/21/2018 12:00 AM - 7/13/2018 11:59 PM
Pike County Lake Conference Center 722 County Road 2224
Troy
Alabama
36081
United States
July
26
OSHA 10 Hour General Industry Training Course - 7/26-27/2018
Event Start Date: 7/26/2018 8:00 AM Event End Date: 7/27/2018 11:00 AM
Cost per place: $195.00
This course is designed to increase your employees' and Supervisors' awareness of the OSHA rules and regulations that apply to them. This day and a half course provides an overview of OSHA's 29 CFR General Industry Standard and details the applicable S&H regulations to the affected employees of your facility. This training course will be administered by instructors that are authorized through the OSHA Outreach Training Program. Each participant will receive an OSHA 10 hour certification card from the Department of Labor and an ATN training certificate upon completion of the course. Training will cover guidelines set forth by standard OSHA safety and health guidelines and regulations.
Event Locations
Pike County Lake Conference Center
This event can only be signed up for between 5/27/2018 12:00 AM - 7/19/2018 11:59 PM
UAHuntsville Center for Technology 301 Sparkman Dr NW
Huntsville
Alabama
35805
United States
Aug
6
Six Sigma Green Belt Certification Course 7/6/18
Event Start Date: 8/6/2018 8:30 AM Event End Date: 8/10/2018 8:30 AM
Cost per place: $1,685.00
Six Sigma is a disciplined, data-driven methodology for reducing variation in any process. The Six Sigma methodology–driven by the DMAIC (define, measure, analyze, improve, control) process–is executed by Six Sigma green belts, Six Sigma black belts, and overseen by Six Sigma master black belts. Green belt training participants receive a subset of the more advanced black belt training course, with an emphasis on developing a structured problem-solving strategy for addressing business improvement projects by using intermediate quality tools within the Six Sigma methodology.
Event Locations
UAHuntsville Center for Technology
This event can only be signed up for between 6/7/2018 12:00 AM - 8/1/2018 11:59 PM
Auburn Center for Developing Industries 1500 Pumphrey Ave
Auburn
Alabama
36832
United States
Aug
21
Lean Bronze Certification Review Course - 8/21/2018
Event Start Date: 8/21/2018 8:30 AM Event End Date: 8/23/2018 12:00 PM
Cost per place: $750.00
This course is intended to prepare participants to take and pass the Lean Bronze Certification Examination, which will be offered on the third day for those who sign up for the exam separately with SME. This 3-hour multiple choice exam is designed to test understanding of the Lean Certification Body of Knowledge.
Event Locations
Auburn Center for Developing Industries
This event can only be signed up for between 12/14/2017 12:00 AM - 8/14/2018 11:59 PM
Trenholm State Patterson Campus 3920 Troy Hwy
Montgomery
Alabama
36116
United States
Aug
27
Introduction to Fanuc Robot Programming and Operations - 8/27-8/30/18
Event Start Date: 8/27/2018 8:00 AM Event End Date: 8/30/2018 4:00 PM
Cost per place: $795.00
Upon completion of this course students will gain knowledge and understanding of Fanuc robot systems. They will also learn to create robot programs, and troubleshoot robot problems
Event Locations
Trenholm State Patterson Campus
This event can only be signed up for between 6/28/2018 12:00 AM - 8/22/2018 11:59 PM
Vulcan, Inc. 339 E Berry Ave
Foley
Alabama
36535
United States
Sept
10
Lean Leadership Boot Camp - 9/10/2018
Event Start Date: 9/10/2018 8:00 AM Event End Date: 9/14/2018 12:00 PM
Cost per place: $1,749.00
Our 4.5-day Lean Leadership Boot teaches not only the tools of lean, but also offers proven leadership techniques for implementing lean in your organization, managing culture change, and developing continuous improvement engagement throughout your workforce.
Event Locations
Vulcan, Inc.
This event can only be signed up for between 11/24/2017 12:00 AM - 9/3/2018 11:59 PM
Auburn Center for Developing Industries 1500 Pumphrey Ave
Auburn
Alabama
36832
United States
Sept
26
Print Reading for Industry - 9/26/2018
Event Start Date: 9/26/2018 8:00 AM Event End Date: 9/28/2018 4:30 PM
Cost per place: $575.00
In only 24 hours of training, our specialists at the Auburn Technical Assistance Center can improve the print reading skills of your employees. This course is taught to the ANSIY14.5M-1982 and ASME Y14.5M 1994 Standards and is designed to teach employees to read and understand mechanical prints. The course consists of eight three- hour classes. Each class consists of a lecture, practical exercises and an exam on the covered material.
Event Locations
Auburn Center for Developing Industries
This event can only be signed up for between 12/7/2017 12:00 AM - 9/19/2018 11:59 PM
Auburn Center for Developing Industries 1500 Pumphrey Ave
Auburn
Alabama
36832
United States
Oct
1
Six Sigma Green Belt - 10/1/2018
Event Start Date: 10/1/2018 8:00 AM Event End Date: 10/5/2018 4:30 PM
Cost per place: $2,600.00
The designation “Green Belt” refers to people who have mastered the basic skills, and are assigned to Six Sigma projects as needed. Green Belts are usually led by the Black Belts to apply the right tools at the right time to make process improvements to relatively difficult problems. Sometimes, however, they lead their own teams to exploit the opportunities of “low-hanging fruit” through Process Mapping, data collection, and analysis.
Event Locations
Auburn Center for Developing Industries
This event can only be signed up for between 10/6/2017 12:00 AM - 9/24/2018 11:59 PM
Gadsden ATN Center 401 Korner St
Gadsden
Alabama
35903
United States
Oct
5
Introduction to Fanuc Robot Programming and Operations - 10/5/2018 (Four Consecutive Fridays)
Event Start Date: 10/5/2018 8:00 AM Event End Date: 10/26/2018 4:00 PM
Cost per place: $795.00
THIS CLASS WILL MEET ON FOUR CONSECUTIVE FRIDAYS BEGINNING OCTOBER 5, 2018. Upon completion of this course, students will gain knowledge and understanding of Fanuc robot systems. They will also learn to create robot programs, and troubleshoot robot problems.
Event Locations
Gadsden ATN Center
This event can only be signed up for between 8/6/2018 12:00 AM - 9/28/2018 11:59 PM
Auburn Center for Developing Industries 1500 Pumphrey Ave
Auburn
Alabama
36832
United States
Oct
16
Six Sigma Yellow Belt - 10/16/2018
Event Start Date: 10/16/2018 8:00 AM Event End Date: 10/17/2018 4:00 PM
Cost per place: $595.00
Gain a broad understanding of Six Sigma and lean methodologies and develop the capability to understand and use basic tools for process improvement. Learn to contribute to Lean Six Sigma projects and deliver meaningful results.
Event Locations
Auburn Center for Developing Industries
This event can only be signed up for between 11/30/2017 12:00 AM - 10/9/2018 11:59 PM
1 2